Gleamworks

Bentley Ceramic Coating

At Gleamworks, our approach to detailing for Bentley cars starts with an in-person paint check, not a menu choice made over the phone. A Bentley car wash can remove loose dirt, but it will not remove wash marks or stop water sitting in chips. We have protected 2,000+ cars, and we can set out coating, correction, and film options against how you use yours. Call 604-789-0762 to book the inspection.
Rolls-Royce-ceramic-coating

WHAT IS CERAMIC COATING?

A published five-year coating at Gleamworks costs $1,200–$2,500 installed; repainting one panel at a Metro Vancouver body shop typically costs $600–$1,500. That is worth setting against a repair on a hand-painted Bentley body with many coats of lacquer, where a repaint can break the run of original paint even when the blend looks good. A Bentley ceramic coating is a thin sacrificial layer that resists light wash marks and gives rain, grime, bird droppings, and tree residue less to cling to. It will not stop a stone chip, and it cannot replace careful washing. Before we coat, we machine-polish in house to remove swirl marks, spider-webbing, and oxidation. We inspect the finish under shop lights before we choose the correction work. If you are comparing car detailing Bentley work, ask whether the price includes that correction instead of putting a coating over marks already in the lacquer. That answer tells you what the coating is being asked to protect.
System x accredited installation center
Gtechniq Logo
carpro approved detailing centre
revivify coatings logo

WHY TO CHOOSE PREMIUM COATING?

Rain falls on 169.5 days with measurable precipitation each year here, so water dries on paint, glass, and trim more often than it does in a dry climate. When that water sits, it can leave mineral spots and hold grime on the broad painted surfaces and close panel gaps of a Bentley. Shaded parking also gives moss or algae a place to grow, which needs cleaning before it becomes a paint-care problem. A coating does not make that upkeep disappear, but it gives dirt and water less grip between washes. Bentley detailing services at Gleamworks start with a wash and a close look at your paint. We then match CQuartz Professional, Gtechniq Crystal Serum Ultra, or Revivify to its condition and use. Each adds a hard sacrificial layer that resists light marring, but none removes the need to wash away road film. The choice also depends on how long you plan to keep the car and how it is parked. Against repeat short-term products at $600–$1,200 a year, the published annual cost for that term is $300–$550.

CERAMIC COATINGS BENEFITS

Stone chips need a different answer. The Sea-to-Sky Highway between Horseshoe Bay and Squamish is one of the province’s three worst stone-chip runs, and a ceramic layer cannot absorb that hit. Grit follows traffic at speed and strikes the front panels, mirrors, rocker areas, and lower doors before rain can work into the damage. For a Bentayga, Continental GT, or Flying Spur that makes this drive, protect the leading painted panels with film and coat the rest for easier washing. Our Gold paint protection film package starts at $1,799 and includes the full hood, full fenders, mirrors, front bumper, and headlights. We can also add film to the rockers, door sills, and luggage loading lip where shoes, bags, and road grit leave marks. We stock XPEL, STEK DYNOshield, and SunTek in gloss, satin, and matte finishes. Film carries up to a 9-year manufacturer warranty; with STEK Final Coat, an extended 12-year warranty is available. Bentley car detailing works best when the plan separates impact protection from surface care instead of asking one product to do both jobs.

1

+

Happy Clients

1

%

Customer Satisfaction

PRICING FOR Bentley

PREMIUM ELITE

Premium Package

Gtechniq Crystal Serum Ultra

Standard

  • Made in the UK. A super‑slick, ultra‑gloss finish achieved through a multi‑step, 2‑day process:
  • Car wash – removes road grime
  • Chemical decontamination – removes brake dust, tar, waxes, sealants, oxidation, etc.
  • Paint polishing – corrects light scratches and swirl marks
  • All paintwork, chrome, plastic, and metal covered with Crystal Serum Ultra
  • 1 layer of Gtechniq EXOv4 applied on top for extra hydrophobic properties

$1699

GET A QUOTE

Big

  • Made in the UK. A super‑slick, ultra‑gloss finish achieved through a multi‑step, 2‑day process:
  • Car wash – removes road grime
  • Chemical decontamination – removes brake dust, tar, waxes, sealants, oxidation, etc.
  • Paint polishing – corrects light scratches and swirl marks
  • All paintwork, chrome, plastic, and metal covered with Crystal Serum Ultra
  • 1 layer of Gtechniq EXOv4 applied on top for extra hydrophobic properties

$1899

GET A QUOTE

Large

  • Made in the UK. A super‑slick, ultra‑gloss finish achieved through a multi‑step, 2‑day process:
  • Car wash – removes road grime
  • Chemical decontamination – removes brake dust, tar, waxes, sealants, oxidation, etc.
  • Paint polishing – corrects light scratches and swirl marks
  • All paintwork, chrome, plastic, and metal covered with Crystal Serum Ultra
  • 1 layer of Gtechniq EXOv4 applied on top for extra hydrophobic properties

$2099

GET A QUOTE

ADDITIONAL OPTIONS

Wheels coating – $400

Glass coating – $199

Interior protection – $299

* Official warranty and eligible for ICBC claims for reapplication if car accidents occur.

** Vehicles must be clean prior to service. Car wash is an additional $50.

*** Prices listed are estimates. Please book a free assessment for an accurate estimate.

Elite Package

CarPro CQuartz Professional

Standard

  • Process needs 2 – 3 days to get the following steps done:
  • All exterior and interior surfaces cleaned and decontaminated
  • Paint Correction for Added Depth, Light Swirl Removal
  • 1 layer of CarPro gloss enhancement primer applied to all painted surfaces
  • 2 layers of C.Quartz Professional – Applied to all Painted and Metal Surfaces including Wheels (front facing)
  • 1 layer of C.Quartz DLUX – Applied to all Exterior Plastic Surfaces
  • 1 layer of Silica sealant to all surfaces

$1699

GET A QUOTE

Big

  • Process needs 2 – 3 days to get the following steps done:
  • All exterior and interior surfaces cleaned and decontaminated
  • Paint Correction for Added Depth, Light Swirl Removal
  • 1 layer of CarPro gloss enhancement primer applied to all painted surfaces
  • 2 layers of C.Quartz Professional – Applied to all Painted and Metal Surfaces including Wheels (front facing)
  • 1 layer of C.Quartz DLUX – Applied to all Exterior Plastic Surfaces
  • 1 layer of Silica sealant to all surfaces

$1899

GET A QUOTE

Large

  • Process needs 2 – 3 days to get the following steps done:
  • All exterior and interior surfaces cleaned and decontaminated
  • Paint Correction for Added Depth, Light Swirl Removal
  • 1 layer of CarPro gloss enhancement primer applied to all painted surfaces
  • 2 layers of C.Quartz Professional – Applied to all Painted and Metal Surfaces including Wheels (front facing)
  • 1 layer of C.Quartz DLUX – Applied to all Exterior Plastic Surfaces
  • 1 layer of Silica sealant to all surfaces

$2099

GET A QUOTE

If your car is an extension of yourself and you want something exceptional, choose CarPro. This is our most comprehensive correction, detailing, and protection package — delivered by certified professionals at a limited number of approved centres. The C.Quartz Professional package gives you complete care plus guidance on maintenance routines that can extend protection for up to 10 years.

ADDITIONAL OPTIONS

CQuartz leather ceramic coating

Upholstery and Carpets Protection with CQuartz Fabric

* Official warranty and eligible for ICBC claims for reapplication if car accidents occur.

** Vehicles must be clean prior to service. Car wash is an additional $50.

*** Prices listed are estimates. Please book a free assessment for an accurate estimate.

ADDITIONAL INFORMATION

IS CERAMIC COATING WORTH IT?
WHAT ARE THE BENEFITS OF CERAMIC COATING FOR CARS?
BREAKING DOWN THE COST OF CERAMIC COATING 2022

FAQ

Book Your Ceramic Coating Today – Protect Your Investment for the Next Years.

How much does Bentley ceramic coating cost in Vancouver?

$600–$2,800 installed is the published range for a Bentley, based on vehicle size and coating term. Sedans and compacts run $600–$2,200, while SUVs and crossovers run $1,000–$2,800. A Bentayga usually falls into the SUV range. Paint correction, if needed, is assessed before coating because a coating locks in what is underneath.

Is dealer ceramic protection worth it for a Bentley?

Usually, no, unless the dealer gives you the exact product, term, prep work, and warranty in writing. Gleamworks installs CQuartz Professional, Gtechniq Crystal Serum Ultra, Revivify, and graphene options after proper cleaning and correction. The price gap should buy clear product choice, in-house polishing, and a coating matched to your Bentley’s paint condition.

What are the downsides of ceramic coating a Bentley?

The real downside is cost and prep time. A coating is not scratch-proof, and it will not hide swirls, chips, or deep marks. If the paint needs two-stage correction, that work typically costs $600–$1,600 in Metro Vancouver. A poor install can also trap defects under the coating, which looks worse than leaving the paint alone.

How long does ceramic coating last on a Bentley?

A professionally installed coating lasts 9–18 months, 3–5 years, 5–7 years, or up to 9 years with maintenance, depending on the package. Parked outdoors, frequent road salt, harsh wash brushes, and missed washes shorten that life. The long-term options suit a Bentley driven year-round; shorter terms suit lower-use cars or leased vehicles.

What can ruin a Bentley ceramic coating?

Automatic brush tunnels, harsh alkaline cleaners, abrasive pads, and letting bird droppings or tree sap bake on the paint can shorten coating life. Do not polish coated panels unless the coating is being removed and reapplied. Avoid strong degreasers on a routine wash. The coating adds a thin, hard sacrificial layer that resists light marring, not damage from neglect.

Can I take a ceramic-coated Bentley through a car wash?

Yes, use a touchless bay or careful hand wash, not a brush wash. Keep a pressure-washer nozzle moving and away from close-range edges, badges, and trim. Rinse grit first, use a pH-neutral car shampoo, then dry the car so mineral-rich water does not spot. Regular washing remains necessary because coatings do not stop dirt from settling.

Is ceramic coating worth it for a Bentley in Vancouver?

Yes, for a Bentley driven or parked outside in Vancouver. The city gets 1,159.5 mm of precipitation over 169.5 days a year, so rain sits, dries, and leaves mineral spotting. Winter brine carried over the Knight Street Bridge also collects around lower panels. A coating makes routine washing easier and reduces light wash marring, but it will not stop stone chips.

Will ceramic coating help Bentley resale or lease return?

It can reduce reconditioning work, provided you maintain it and document the installation. Clean, corrected paint may help avoid some polishing, chip repair, or repainting before sale or return. Repainting one panel in Metro Vancouver typically runs $600–$1,500. For hand-painted bodies with many lacquer coats, preserving the original finish matters more than chasing a claimed resale percentage. Call 604-789-0762 for an inspection and quote.

REQUEST AN APPOINTMENT ONLINE

After you submit the form, a representative will call you back with the information you’ll need to make an appointment.





    Please prove you are human by selecting the tree.

    ▲
    Cart
    Call Now