Gleamworks

Ferrari Ceramic Coating

Bring the car to 5-8855 Laurel Street in Marpole, off Oak Street near Marine Drive, or call 604-789-0762. If you are searching for Detailing Ferrari, we check paint marks, where the car drives, and how it is stored before we set the prep and coating plan. Gleamworks has protected 2,000+ cars over nine years. Ask for a coating assessment and decide after you have seen the paint condition.
Rolls-Royce-ceramic-coating

WHAT IS CERAMIC COATING?

The costly mistake is to coat paint before anyone checks what sits in it. Ferrari Ceramic Coating should begin with a proper wash, close inspection, and machine polishing where the paint needs it; otherwise, swirl marks and spider-webbing remain beneath the new layer. Fixing neglected marks later can require a two-stage correction, typically in the range of $600–$1,600 at Metro Vancouver shops, depending on size and condition. Gleamworks corrects paint in-house before we apply CQuartz Professional, Gtechniq Crystal Serum Ultra, or Revivify. The coating leaves a thin, hard sacrificial layer that resists light marring and makes routine washing less punishing. On a 296 or Roma stored through the wet season, inspect the paint before storage and again before you choose the coating.
System x accredited installation center
Gtechniq Logo
carpro approved detailing centre
revivify coatings logo

WHY TO CHOOSE PREMIUM COATING?

Winter driving changes the choice more than most owners expect. If you are comparing Ceramic Coating Ferrari options, ask what happens after a run on Highway 1 or the Sea-to-Sky, where brine and salt collect in rocker panels and wheel wells. A seasonal Ferrari parked after that drive can hold the residue through weeks of rain. The coating helps dirt release during washing, but it cannot close a chip or replace a thorough clean of those low areas. Ferrari car detailing at Gleamworks can include wheel and glass coatings, while our interior and steam cleaning handles the cabin after winter use. For cars kept near Steveston, rinse the wheel wells and rockers before storage; the coating is a wash aid, not a substitute for that step.

CERAMIC COATINGS BENEFITS

The useful benefit is easier, safer wash care on paint that needs to stay clean between drives. Ferrari auto detailing often ends with a clean surface, yet the next wash can add light marks if dirt drags across it. A Ferrari ceramic coat adds a thin sacrificial layer that resists light marring; it does not stop stone chips, so choose film separately for impact-prone panels. Ceramic coating for Ferrari can cost $1,200–$2,500 installed for a five-year service, or $300–$550 a year. That compares with $600–$1,200 a year for repeat one-year products. We check for oxidation and wash marks first. The Purosangue and SF90 deserve an inspection before any quote, because paint condition and use decide the prep work. The price comparison gives you a clear choice between repeat short-term work and a longer service.

1

+

Happy Clients

1

%

Customer Satisfaction

PRICING FOR Ferrari

PREMIUM ELITE

Premium Package

Gtechniq Crystal Serum Ultra

Standard

  • Made in the UK. A super‑slick, ultra‑gloss finish achieved through a multi‑step, 2‑day process:
  • Car wash – removes road grime
  • Chemical decontamination – removes brake dust, tar, waxes, sealants, oxidation, etc.
  • Paint polishing – corrects light scratches and swirl marks
  • All paintwork, chrome, plastic, and metal covered with Crystal Serum Ultra
  • 1 layer of Gtechniq EXOv4 applied on top for extra hydrophobic properties

$1699

GET A QUOTE

Big

  • Made in the UK. A super‑slick, ultra‑gloss finish achieved through a multi‑step, 2‑day process:
  • Car wash – removes road grime
  • Chemical decontamination – removes brake dust, tar, waxes, sealants, oxidation, etc.
  • Paint polishing – corrects light scratches and swirl marks
  • All paintwork, chrome, plastic, and metal covered with Crystal Serum Ultra
  • 1 layer of Gtechniq EXOv4 applied on top for extra hydrophobic properties

$1899

GET A QUOTE

Large

  • Made in the UK. A super‑slick, ultra‑gloss finish achieved through a multi‑step, 2‑day process:
  • Car wash – removes road grime
  • Chemical decontamination – removes brake dust, tar, waxes, sealants, oxidation, etc.
  • Paint polishing – corrects light scratches and swirl marks
  • All paintwork, chrome, plastic, and metal covered with Crystal Serum Ultra
  • 1 layer of Gtechniq EXOv4 applied on top for extra hydrophobic properties

$2099

GET A QUOTE

ADDITIONAL OPTIONS

Wheels coating – $400

Glass coating – $199

Interior protection – $299

* Official warranty and eligible for ICBC claims for reapplication if car accidents occur.

** Vehicles must be clean prior to service. Car wash is an additional $50.

*** Prices listed are estimates. Please book a free assessment for an accurate estimate.

Elite Package

CarPro CQuartz Professional

Standard

  • Process needs 2 – 3 days to get the following steps done:
  • All exterior and interior surfaces cleaned and decontaminated
  • Paint Correction for Added Depth, Light Swirl Removal
  • 1 layer of CarPro gloss enhancement primer applied to all painted surfaces
  • 2 layers of C.Quartz Professional – Applied to all Painted and Metal Surfaces including Wheels (front facing)
  • 1 layer of C.Quartz DLUX – Applied to all Exterior Plastic Surfaces
  • 1 layer of Silica sealant to all surfaces

$1699

GET A QUOTE

Big

  • Process needs 2 – 3 days to get the following steps done:
  • All exterior and interior surfaces cleaned and decontaminated
  • Paint Correction for Added Depth, Light Swirl Removal
  • 1 layer of CarPro gloss enhancement primer applied to all painted surfaces
  • 2 layers of C.Quartz Professional – Applied to all Painted and Metal Surfaces including Wheels (front facing)
  • 1 layer of C.Quartz DLUX – Applied to all Exterior Plastic Surfaces
  • 1 layer of Silica sealant to all surfaces

$1899

GET A QUOTE

Large

  • Process needs 2 – 3 days to get the following steps done:
  • All exterior and interior surfaces cleaned and decontaminated
  • Paint Correction for Added Depth, Light Swirl Removal
  • 1 layer of CarPro gloss enhancement primer applied to all painted surfaces
  • 2 layers of C.Quartz Professional – Applied to all Painted and Metal Surfaces including Wheels (front facing)
  • 1 layer of C.Quartz DLUX – Applied to all Exterior Plastic Surfaces
  • 1 layer of Silica sealant to all surfaces

$2099

GET A QUOTE

If your car is an extension of yourself and you want something exceptional, choose CarPro. This is our most comprehensive correction, detailing, and protection package — delivered by certified professionals at a limited number of approved centres. The C.Quartz Professional package gives you complete care plus guidance on maintenance routines that can extend protection for up to 10 years.

ADDITIONAL OPTIONS

CQuartz leather ceramic coating

Upholstery and Carpets Protection with CQuartz Fabric

* Official warranty and eligible for ICBC claims for reapplication if car accidents occur.

** Vehicles must be clean prior to service. Car wash is an additional $50.

*** Prices listed are estimates. Please book a free assessment for an accurate estimate.

ADDITIONAL INFORMATION

IS CERAMIC COATING WORTH IT?
WHAT ARE THE BENEFITS OF CERAMIC COATING FOR CARS?
BREAKING DOWN THE COST OF CERAMIC COATING 2022

FAQ

Book Your Ceramic Coating Today – Protect Your Investment for the Next Years.

How much does Ferrari ceramic coating cost?

$600–$3,500+ installed is Gleamworks’ published range for Ferrari ceramic coating. A Roma-sized car falls within the sedan or compact bracket of $600–$2,200, while a Purosangue falls within the SUV or crossover bracket of $1,000–$2,800. Final cost depends on paint condition, coating term, and correction needed before application. Gleamworks can inspect it in Marpole and quote the work.

Is Ferrari dealer ceramic coating worth it?

Usually, take a dealer package only if its written scope matches the work. Dealer coatings are often sold at delivery, while Gleamworks includes in-house machine correction to remove swirls, spider-webbing, and oxidation before coating. Compare the coating name, prep, covered surfaces, duration, and aftercare. A lower quote can be fair, but it may buy less preparation rather than the same job.

What are Ferrari ceramic coating downsides?

The main drawback is cost and prep time. Ceramic coating is not scratch-proof and will not stop stone chips, so it cannot replace PPF on a Ferrari that sees frequent highway use. Paint correction may also be needed first, because coating over swirls locks their look in. A poor, cheap install can leave high spots and look worse than bare paint.

How long does Ferrari ceramic coating last?

A Ferrari coating lasts 9–18 months at the entry level, 3–5 years for the five-year option, 5–7 years for the seven-year option, or up to 9 years with maintenance. Dirty storage, missed washing, mineral deposits, and harsh chemicals shorten that life. Gleamworks uses CQuartz Professional, Gtechniq Crystal Serum Ultra, Revivify, and graphene options according to the car’s use and finish.

What ruins a Ferrari ceramic coating?

Harsh alkaline or acidic cleaners, abrasive brushes, and letting bird mess, sap, or water spots bake on will shorten a coating’s useful life. Do not use polishing compound unless the coating is being removed and renewed. Avoid automatic tunnel washes with brushes. Rinse grit first, clean spills promptly, and use a coating-safe wash soap.

Can you wash a ceramic-coated Ferrari?

Hand washing is safest, and a touchless bay is generally fine for a coated Ferrari. Use a pressure washer to rinse loose grit, but keep the nozzle moving and do not concentrate it on one spot. Skip brush bays and dirty wash mitts, which can add marring. Dry with clean microfiber towels so standing water does not leave mineral spots.

Is Ferrari ceramic coating worth it in Vancouver?

Vancouver makes ceramic coating worthwhile, especially for a Ferrari driven or stored outdoors. The airport normal records 1,159.5 mm of annual precipitation across 169.5 days, so water spotting and grime are routine concerns. Coastal salt spray around Horseshoe Bay adds another wash burden. Coating makes cleanup easier and resists light marring, but it does not stop chips or replace regular washing.

Does coating help Ferrari lease returns?

It can reduce lease-return and resale reconditioning risk, but it does not guarantee a result or change a Ferrari warranty. Keep the invoice and service record, then check the lease terms before return. Avoiding a repaint may matter: one panel at a Metro Vancouver body shop typically costs $600–$1,500. Buyers may value well-kept original paint, but no coating can promise a resale gain.

REQUEST AN APPOINTMENT ONLINE

After you submit the form, a representative will call you back with the information you’ll need to make an appointment.





    Please prove you are human by selecting the truck.

    ▲
    Cart
    Call Now