Gleamworks

Honda Ceramic Coating

Call 604-789-0762 or visit Gleamworks at 5-8855 Laurel Street. We have protected 2,000+ cars over nine years, and we can assess your Civic, CR-V, Pilot, Accord, or HR-V before we quote. Honda car detailing can include paint correction, interior steam cleaning, tint, and odour removal on the same site. Bring the car in for a paint check and written scope.
Rolls-Royce-ceramic-coating

WHAT IS CERAMIC COATING?

Vancouver records measurable precipitation on 169.5 days each year, so water often dries on your Honda between washes. It leaves mineral spots, and shaded parking can grow moss or algae around trim. Honda ceramic coating is a thin, hard sacrificial layer that helps grime release and resists light marring; it does not stop stone chips. Before any work begins, we inspect paint under lights and use machine polishing to correct swirls, spider-webbing, and oxidation in-house. It keeps the paint state beneath it, so we correct first. Civics and CR-Vs are among the most common cars around Vancouver, with daily wear from wet commutes, parkade drips, and dirty hands at doors. Ceramic coating for Honda cars suits drivers who will still wash but want less grime stuck to paint. We can show which marks will polish out before you book the work.
System x accredited installation center
Gtechniq Logo
carpro approved detailing centre
revivify coatings logo

WHY TO CHOOSE PREMIUM COATING?

Near Deep Cove, winter rarely stays deeply frozen. Water enters an exposed chip, expands as temperatures move through the freeze-thaw band, and can start rust where a chip might sit in a dry-cold city. That is its limit: it helps with wash marks and dirt, but cannot bridge a chip or replace film on impact areas. Honda ceramic coating price for our 5-year service is $1,200–$2,500 installed, based on size and paint condition. Over that term, published cost is $300–$550 per year, against $600–$1,200 a year for repeat 1-year products. A Honda coating package begins with a paint check; then we set the correction and finish scope. The lower yearly figure only holds when maintenance lets it reach its stated term. We will set that maintenance plan with you at handover.

CERAMIC COATINGS BENEFITS

The gain from Honda detailing is a cleaner surface between washes, not a claim that paint will stay perfect. After correction, we apply CQuartz Professional, Gtechniq Crystal Serum Ultra, or Revivify, which offers a self-healing ceramic option. For ceramic coating Honda Civic work, we check the front edge, rocker panels, and loading lip before we discuss the finish alone. Where chips are likely, we can add XPEL, STEK DYNOshield, or SunTek film in gloss, satin, or matte. A Honda ceramic coating warranty question needs a product-specific answer, because the up-to-9-year manufacturer warranty is for film. Adding STEK Final Coat can extend that film coverage to 12 years. Honda glass coating and wheel coating can be added for surfaces that take road grime. Repainting one damaged panel at a local body shop typically falls in the range of $600–$1,500.

1

+

Happy Clients

1

%

Customer Satisfaction

PRICING FOR Honda

PREMIUM ELITE

Premium Package

Gtechniq Crystal Serum Ultra

Standard

  • Made in the UK. A super‑slick, ultra‑gloss finish achieved through a multi‑step, 2‑day process:
  • Car wash – removes road grime
  • Chemical decontamination – removes brake dust, tar, waxes, sealants, oxidation, etc.
  • Paint polishing – corrects light scratches and swirl marks
  • All paintwork, chrome, plastic, and metal covered with Crystal Serum Ultra
  • 1 layer of Gtechniq EXOv4 applied on top for extra hydrophobic properties

$1699

GET A QUOTE

Big

  • Made in the UK. A super‑slick, ultra‑gloss finish achieved through a multi‑step, 2‑day process:
  • Car wash – removes road grime
  • Chemical decontamination – removes brake dust, tar, waxes, sealants, oxidation, etc.
  • Paint polishing – corrects light scratches and swirl marks
  • All paintwork, chrome, plastic, and metal covered with Crystal Serum Ultra
  • 1 layer of Gtechniq EXOv4 applied on top for extra hydrophobic properties

$1899

GET A QUOTE

Large

  • Made in the UK. A super‑slick, ultra‑gloss finish achieved through a multi‑step, 2‑day process:
  • Car wash – removes road grime
  • Chemical decontamination – removes brake dust, tar, waxes, sealants, oxidation, etc.
  • Paint polishing – corrects light scratches and swirl marks
  • All paintwork, chrome, plastic, and metal covered with Crystal Serum Ultra
  • 1 layer of Gtechniq EXOv4 applied on top for extra hydrophobic properties

$2099

GET A QUOTE

ADDITIONAL OPTIONS

Wheels coating – $400

Glass coating – $199

Interior protection – $299

* Official warranty and eligible for ICBC claims for reapplication if car accidents occur.

** Vehicles must be clean prior to service. Car wash is an additional $50.

*** Prices listed are estimates. Please book a free assessment for an accurate estimate.

Elite Package

CarPro CQuartz Professional

Standard

  • Process needs 2 – 3 days to get the following steps done:
  • All exterior and interior surfaces cleaned and decontaminated
  • Paint Correction for Added Depth, Light Swirl Removal
  • 1 layer of CarPro gloss enhancement primer applied to all painted surfaces
  • 2 layers of C.Quartz Professional – Applied to all Painted and Metal Surfaces including Wheels (front facing)
  • 1 layer of C.Quartz DLUX – Applied to all Exterior Plastic Surfaces
  • 1 layer of Silica sealant to all surfaces

$1699

GET A QUOTE

Big

  • Process needs 2 – 3 days to get the following steps done:
  • All exterior and interior surfaces cleaned and decontaminated
  • Paint Correction for Added Depth, Light Swirl Removal
  • 1 layer of CarPro gloss enhancement primer applied to all painted surfaces
  • 2 layers of C.Quartz Professional – Applied to all Painted and Metal Surfaces including Wheels (front facing)
  • 1 layer of C.Quartz DLUX – Applied to all Exterior Plastic Surfaces
  • 1 layer of Silica sealant to all surfaces

$1899

GET A QUOTE

Large

  • Process needs 2 – 3 days to get the following steps done:
  • All exterior and interior surfaces cleaned and decontaminated
  • Paint Correction for Added Depth, Light Swirl Removal
  • 1 layer of CarPro gloss enhancement primer applied to all painted surfaces
  • 2 layers of C.Quartz Professional – Applied to all Painted and Metal Surfaces including Wheels (front facing)
  • 1 layer of C.Quartz DLUX – Applied to all Exterior Plastic Surfaces
  • 1 layer of Silica sealant to all surfaces

$2099

GET A QUOTE

If your car is an extension of yourself and you want something exceptional, choose CarPro. This is our most comprehensive correction, detailing, and protection package — delivered by certified professionals at a limited number of approved centres. The C.Quartz Professional package gives you complete care plus guidance on maintenance routines that can extend protection for up to 10 years.

ADDITIONAL OPTIONS

CQuartz leather ceramic coating

Upholstery and Carpets Protection with CQuartz Fabric

* Official warranty and eligible for ICBC claims for reapplication if car accidents occur.

** Vehicles must be clean prior to service. Car wash is an additional $50.

*** Prices listed are estimates. Please book a free assessment for an accurate estimate.

ADDITIONAL INFORMATION

IS CERAMIC COATING WORTH IT?
WHAT ARE THE BENEFITS OF CERAMIC COATING FOR CARS?
BREAKING DOWN THE COST OF CERAMIC COATING 2022

FAQ

Book Your Ceramic Coating Today – Protect Your Investment for the Next Years.

How much does Honda ceramic coating cost in Vancouver?

$600–$2,200 covers a Honda sedan or compact, while an SUV or crossover is $1,000–$2,800. The final price depends on coating life, vehicle size, paint condition, and correction work needed first. Civic and Accord pricing often falls in the smaller range, while CR-V, Pilot, and HR-V pricing reflects their larger paint area.

Is Honda dealer ceramic coating worth it?

Usually no, unless the dealer states the exact product, prep work, service life, and written coverage. A dealer package is often sold as an add-on. Gleamworks offers CQuartz Professional, Gtechniq Crystal Serum Ultra, Revivify, and graphene options, with in-house paint correction available first. Any price gap should buy clear product choice, proper prep, and defined coverage.

What are the downsides of Honda ceramic coating?

The main drawback is cost and prep time. Ceramic coating does not stop stone chips, and it is not scratch-proof. It adds a thin, hard sacrificial layer that resists light marring. Swirls, oxidation, and spider-webbing may need machine polishing first. A rushed or cheap install can leave poor paint condition visible under the coating.

How long does Honda ceramic coating last?

A Honda coating can last from 9–18 months to up to 9 years, depending on the package and maintenance. The common bands are 3–5 years, 5–7 years, and up to 9 years. Frequent brush washes, abrasive polishing, parked-on contamination, and skipped washing shorten its working life. Longer-life coatings still need regular care.

What destroys a Honda ceramic coating?

Do not use abrasive pads, wash brushes, compound polish, or harsh degreasers on a coated Honda. Do not let tree sap, bird droppings, road salt, or mineral-rich water bake onto the paint. Those habits wear the sacrificial layer and create marks the coating cannot hide. Wash contamination off sooner, especially on an outdoor-parked vehicle.

Can I use car washes after Honda ceramic coating?

Hand washing is safest. A touchless bay is generally fine if you rinse well, while brush tunnels can add marring to the coating surface. A pressure washer is safe with a moving spray held back from trim, badges, and damaged paint. Do not use abrasive mitts or towels. The coating still needs regular washing to shed grime.

Is ceramic coating worth it on a Honda in Vancouver?

Yes, it is worthwhile for a daily-driven Honda in Vancouver. Airport normals record 1,159.5 mm of annual precipitation across 169.5 days. That much rain leaves mineral spotting and standing water, while winter brine can cling to lower panels. Coating makes routine washing easier, but it cannot prevent chips or replace cleaning.

Does ceramic coating affect Honda warranty or lease return?

Ceramic coating should not affect a Honda factory warranty or lease return, but confirm the inspection terms in your lease. It will not erase prior damage or stop stone chips. At turn-in or resale, cleaner paint can reduce reconditioning needs. Repainting one panel in Metro Vancouver typically runs $600–$1,500, so avoided paint work may matter more than a promised resale percentage.

REQUEST AN APPOINTMENT ONLINE

After you submit the form, a representative will call you back with the information you’ll need to make an appointment.





    Please prove you are human by selecting the tree.

    ▲
    Cart
    Call Now