Gleamworks

Land Rover Paint Protection Film

PAINT PROTECTION FILM FOR VANCOUVER RICHMOND BURNABY SURREY LOWER MAINLAND, BC

WHAT IS PAINT PROTECTION FILM (CLEAR BRA) ?

Paint protection film is a clear urethane layer cut for each panel and laid over sound paint. Land Rover clear bra is an older search term for the same type of front-end film, though it can also cover rockers, sills, and other high-wear areas. It takes the first hit from loose stone, road sand, sap, and light scuffs, then leaves the factory finish beneath it intact where it can. We install XPEL, STEK DYNOshield, and SunTek in gloss, satin, or matte finishes. The film does not stop every impact, and it does not replace washing. Vancouver records measurable precipitation on 169.5 days a year, so dirt and mineral marks still need regular removal. Choose gloss, satin, or matte to suit the finish already on your Land Rover.
System x accredited installation center
Gtechniq Logo
carpro approved detailing centre
revivify coatings logo

BENEFITS OF PAINT PROTECTION FILM

On the lift, we keep seeing the same Land Rover wear: sandblasted rocker panels, chips behind the front wheels, and brine packed into the lower seams. Highway 1 and the Sea-to-Sky carry salt home after winter trips, even when a car spends most of its time on Vancouver pavement. Land Rover Paint Protection Film covers the painted areas that take that blast first, so grit strikes the film instead of the clear coat. Vancouver receives 1,119.2 mm of rain each year, and wet salt stays active longer in wheel wells and along the lower doors. We can protect the front end, then add rocker covers, door sills, or a loading-lip guard where your use calls for them. Check the lower doors and rear arches after a winter drive; those marks tell you how much coverage to buy.

1

+

Happy Clients

1

%

Customer Satisfaction

PRICING FOR Land Rover

In the car graphics below, the areas in red indicate coverage area, not colour. Paint protection film comes is transparent and can have either a gloss or matte finish.

 
paint- protection film standard package

PPF LIGHT PACKAGE

  • Covers half hood
  • Covers half fenders
  • Covers mirrors
  • Front bumper

From $1299

GET A QUOTE
paint protection film ultimate package

PPF GOLD PACKAGE

  • Covers full hood
  • Covers full fenders
  • Covers mirrors
  • Front bumper
  • Headlight

From $1799

GET A QUOTE
paint protection film platinum package

PPF PLATINUM PACKAGE

  • Covers full vehicle.

From $4699

GET A QUOTE

ADDITIONAL OPTIONS

BAGGAGE REST

paint protection film rocker cover

ROCKER COVERS

DOOR SILLS (PAIR)

FAQ

Book Your Ceramic Coating Today – Protect Your Investment for the Next Years.

How long does it take to apply paint protection film?

The work starts with an inspection, wash, and panel prep, not with film on the car. A Range Rover, Defender, Discovery, or Velar may need different coverage based on its paint condition and the areas you want wrapped. Land Rover PPF jobs also vary when we add rockers, door sills, or the loading lip. We inspect edges, trim, prior repairs, and any chips before we book the work, because those details set the right plan. Gleamworks has installed film for 9 years, so we can set coverage around real use rather than a stock package. If you are searching film rover, send photos of the front end, rockers, and rear bumper before choosing a package.

Are there any special care instructions for paint protection film?

After installation, wash your Land Rover often enough to remove brine, grit, sap, and dried rain before they build up at edges and seams. This matters after Cypress Mountain runs, where sand and salt collect behind the wheels and under the rocker panels. Land Rover ceramic coating can go over suitable film and painted areas to make routine washing easier, but it does not replace washing. Avoid harsh brushing on the film edges, pick off nothing with a blade, and use a clean wash mitt rather than grinding grit across the surface. January’s mean daily low is 1.4 °C, which puts Vancouver in the freeze-thaw band. Water can work into an existing chip, then expand, so rinse the lower panels and wheel wells after salted roads. Ask us to add wheel and glass coatings if those areas see the same winter use.

What happens if the film gets scratched?

A light mark in the film is not the same as a cut through to paint. We inspect the mark first, clean it, and check whether it sits in the top surface or has reached the panel below. Land Rover car detailing often means correcting swirls, spider-webbing, and oxidation before a coating goes on; we do that machine polishing in-house. Film damage calls for a different decision. If the impact has torn the material, we can replace the affected piece rather than repainting a bumper or fender. Our Light Package starts at $1,299, while repainting one panel at a Metro Vancouver body shop typically falls in the range of $600–$1,500. Bring the car in before dirt and salt work into a torn edge.

Can paint protection film be removed?

Yes. A trained installer can remove paint protection film and assess the paint beneath it. We check the panel first, then lift the material with controlled heat and clean away any adhesive left behind. If you are pricing land rover paint protection film in niagara falls, note that Gleamworks works from Marpole in Vancouver, near Oak Street and Marine Drive. For local work, film warranties run up to 9 years from the manufacturer, and a 12-year extended warranty is available when STEK Final Coat is added. Removal is a practical choice if a panel needs repair, if one section has impact damage, or if you want to change coverage. Ask us to inspect the film before deciding between removal and replacing one piece.

What kind of vehicles can use PPF?

Land Rover auto detailing and film work suit pavement-driven luxury SUVs as much as hard-used ones. We regularly plan coverage around how a Range Rover, Defender, Discovery, or Velar meets Vancouver roads: front bumper and hood for stone strikes, then rockers and rear loading areas for daily wear. A Gold Package starts at $1,799 and includes the full hood, full fenders, mirrors, front bumper, and headlights. That can make more sense than waiting for chips and paying for touch-up visits, which typically run in the range of $75–$250 each. Gleamworks has protected 2,000+ vehicles, including work in gloss, satin, and matte film. Compare the Gold coverage with the marks already showing on your front end and lower doors.

What areas of Vancouver do you serve?

We provide paint protection film to Vancouver, Richmond and Lower Mainland clients.

Gleamworks Detailing & Ceramic Coating
By appointment only.
5-8855 Laurel Street,
Vancouver, BC, Canada V6P 3V9.
View a map and directions.

How much does Land Rover PPF cost in Vancouver?

From $1,299, Land Rover PPF pricing depends on coverage and vehicle size. The Light Package covers the half hood, half fenders, mirrors and front bumper. Gold starts at $1,799 for full hood, full fenders, mirrors, bumper and headlights. Platinum starts at $4,699 for full coverage. Larger Range Rover and Defender panels can raise the final quote.

Is dealer Land Rover PPF worth it?

Usually, take a dealer package only if its written scope and installer details match the coverage you want. Dealer add-ons are usually sold as bundles, so confirm whether you are buying film, a coating, or both. Gleamworks starts Land Rover film at $1,299 and lists every protected panel. The price gap buys clear coverage, XPEL, STEK DYNOshield or SunTek options, and gloss, satin or matte finishes.

What are downsides of Land Rover PPF?

The main drawbacks are cost, prep time and limits. Film can be damaged by a hard impact, and a damaged section may need replacement. A cheap install can look worse than no film at all, with visible seams, trapped dirt or lifting edges. PPF takes many stone strikes, but it does not stop every impact or remove the need to wash the vehicle.

How long does Land Rover PPF last?

Most installed Land Rover PPF carries up to a 9-year manufacturer warranty. A 12-year extended warranty is available when STEK Final Coat is added. Its real life gets shorter with frequent highway grit, neglected edges, harsh wash chemicals and sun exposure. Warranty coverage does not mean film cannot be damaged, so inspect chips and lifting edges early.

What can damage Land Rover PPF?

Abrasive brushes, harsh solvents, polishing over film edges, and a pressure-washer jet aimed into an edge can shorten film life. Letting cedar sap, bird droppings or mineral deposits bake on the surface also makes cleaning harder. Do not pick at a lifting corner. Have it checked before water and dirt work beneath the film.

Can I wash a Land Rover with PPF?

Yes, hand washing is the safest routine for PPF. Touchless bays are generally safer than brush tunnels, provided their chemicals do not sit and dry on the film. A pressure rinse is safe when you keep the spray moving and avoid directing it into seams or lifted edges. Use clean mitts, rinse grit first, and dry water spots promptly.

Is Land Rover PPF worth it here?

Yes, PPF earns its keep in Vancouver because vehicles face wet roads for much of the year. The city receives 1,159.5 mm of annual precipitation across 169.5 days with measurable precipitation. Water can work into existing chips during freeze-thaw periods, while winter brine and highway grit attack bumpers, hoods, rocker panels and lower doors.

Does PPF help Land Rover lease returns?

It can reduce reconditioning risk by keeping more original paint intact on the panels that take road debris. Repainting one panel at a Metro Vancouver body shop is typically in the range of $600–$1,500. A lease inspector still makes the final call, and damaged film should be assessed before return. For resale, clean original paint may help avoid that repair cost.

REQUEST AN APPOINTMENT ONLINE

After you submit the form, a representative will call you back with the information you’ll need to make an appointment.





    Please prove you are human by selecting the truck.

    ▲
    Cart
    Call Now