Gleamworks

MG Ceramic Coating

Bring the car to Gleamworks at 5-8855 Laurel Street in Marpole, off Oak Street near Marine Drive, for a paint check before you book. For MG detail, call 604-789-0762 and tell us whether it has fresh paint, old marks, or salt-air parking. We will look at the paint, set out the correction needed, and quote the coating work before we begin.
Rolls-Royce-ceramic-coating

WHAT IS CERAMIC COATING?

Timing matters with an enthusiast import: coat it after a fresh respray, three years into ownership, or before a buyer inspects its paint. MG ceramic coating is a liquid layer applied over sound, prepared paint; it helps water release more easily and resists light wash marks. It will not stop a stone chip or replace washing. Vancouver receives 1,119.2 mm of rain in a year, and water left on an old bonnet can dry into marks. For MG detailing, we inspect paint and machine-polish out swirl marks, spider-webbing, and oxidation in our Marpole studio. Then we apply CQuartz Professional, Gtechniq Crystal Serum Ultra, Revivify, or a graphene coating. If you are comparing MG ceramique, ask if correction happens before the coating. Choose the coating after we have seen the paint, not before.
System x accredited installation center
Gtechniq Logo
carpro approved detailing centre
revivify coatings logo

WHY TO CHOOSE PREMIUM COATING?

Along Marine Drive, salt air settles on paint after waterfront parking, then rain keeps it damp. On an older MG, that matters most at chips, seams, and lower panels, where trapped moisture can start rust. MG auto detailing should include a proper wash of the paint and lower body before we coat it, not a quick wipe over salt. An MG car wash needs to clear salt from the lower body. A coating does not seal a chip or halt rust already under paint. It does make routine washing less of a fight, so you can remove salt and dirt sooner. This matters after a damp week beside the water, especially in shade. A five-year coating costs $1,200–$2,500 installed, or $300–$550 a year; repeat one-year products run $600–$1,200 a year. The lower annual cost only holds if the car gets washed and checked.

CERAMIC COATINGS BENEFITS

Protection starts with clean paint, not a bottle. Our MG car detailing work stays in-house because machine polishing must happen before coating; otherwise swirls and dull spots remain under it. We have protected 2,000+ cars over nine years. We use CQuartz Professional, Gtechniq Crystal Serum Ultra, Revivify self-healing ceramic, and graphene options according to paint condition and how the car is kept. The coating adds a thin, hard sacrificial layer that resists light marring. It cannot take the hit meant for film on the front of a car that sees highway grit. A single panel repaint at a Metro Vancouver body shop is typically in the range of $600–$1,500. On an imported classic, avoiding that work can also avoid a difficult paint match and the reconditioning deduction a buyer may make when original paint is part of its appeal.

1

+

Happy Clients

1

%

Customer Satisfaction

PRICING FOR MG

PREMIUM ELITE

Premium Package

Gtechniq Crystal Serum Ultra

Standard

  • Made in the UK. A super‑slick, ultra‑gloss finish achieved through a multi‑step, 2‑day process:
  • Car wash – removes road grime
  • Chemical decontamination – removes brake dust, tar, waxes, sealants, oxidation, etc.
  • Paint polishing – corrects light scratches and swirl marks
  • All paintwork, chrome, plastic, and metal covered with Crystal Serum Ultra
  • 1 layer of Gtechniq EXOv4 applied on top for extra hydrophobic properties

$1699

GET A QUOTE

Big

  • Made in the UK. A super‑slick, ultra‑gloss finish achieved through a multi‑step, 2‑day process:
  • Car wash – removes road grime
  • Chemical decontamination – removes brake dust, tar, waxes, sealants, oxidation, etc.
  • Paint polishing – corrects light scratches and swirl marks
  • All paintwork, chrome, plastic, and metal covered with Crystal Serum Ultra
  • 1 layer of Gtechniq EXOv4 applied on top for extra hydrophobic properties

$1899

GET A QUOTE

Large

  • Made in the UK. A super‑slick, ultra‑gloss finish achieved through a multi‑step, 2‑day process:
  • Car wash – removes road grime
  • Chemical decontamination – removes brake dust, tar, waxes, sealants, oxidation, etc.
  • Paint polishing – corrects light scratches and swirl marks
  • All paintwork, chrome, plastic, and metal covered with Crystal Serum Ultra
  • 1 layer of Gtechniq EXOv4 applied on top for extra hydrophobic properties

$2099

GET A QUOTE

ADDITIONAL OPTIONS

Wheels coating – $400

Glass coating – $199

Interior protection – $299

* Official warranty and eligible for ICBC claims for reapplication if car accidents occur.

** Vehicles must be clean prior to service. Car wash is an additional $50.

*** Prices listed are estimates. Please book a free assessment for an accurate estimate.

Elite Package

CarPro CQuartz Professional

Standard

  • Process needs 2 – 3 days to get the following steps done:
  • All exterior and interior surfaces cleaned and decontaminated
  • Paint Correction for Added Depth, Light Swirl Removal
  • 1 layer of CarPro gloss enhancement primer applied to all painted surfaces
  • 2 layers of C.Quartz Professional – Applied to all Painted and Metal Surfaces including Wheels (front facing)
  • 1 layer of C.Quartz DLUX – Applied to all Exterior Plastic Surfaces
  • 1 layer of Silica sealant to all surfaces

$1699

GET A QUOTE

Big

  • Process needs 2 – 3 days to get the following steps done:
  • All exterior and interior surfaces cleaned and decontaminated
  • Paint Correction for Added Depth, Light Swirl Removal
  • 1 layer of CarPro gloss enhancement primer applied to all painted surfaces
  • 2 layers of C.Quartz Professional – Applied to all Painted and Metal Surfaces including Wheels (front facing)
  • 1 layer of C.Quartz DLUX – Applied to all Exterior Plastic Surfaces
  • 1 layer of Silica sealant to all surfaces

$1899

GET A QUOTE

Large

  • Process needs 2 – 3 days to get the following steps done:
  • All exterior and interior surfaces cleaned and decontaminated
  • Paint Correction for Added Depth, Light Swirl Removal
  • 1 layer of CarPro gloss enhancement primer applied to all painted surfaces
  • 2 layers of C.Quartz Professional – Applied to all Painted and Metal Surfaces including Wheels (front facing)
  • 1 layer of C.Quartz DLUX – Applied to all Exterior Plastic Surfaces
  • 1 layer of Silica sealant to all surfaces

$2099

GET A QUOTE

If your car is an extension of yourself and you want something exceptional, choose CarPro. This is our most comprehensive correction, detailing, and protection package — delivered by certified professionals at a limited number of approved centres. The C.Quartz Professional package gives you complete care plus guidance on maintenance routines that can extend protection for up to 10 years.

ADDITIONAL OPTIONS

CQuartz leather ceramic coating

Upholstery and Carpets Protection with CQuartz Fabric

* Official warranty and eligible for ICBC claims for reapplication if car accidents occur.

** Vehicles must be clean prior to service. Car wash is an additional $50.

*** Prices listed are estimates. Please book a free assessment for an accurate estimate.

ADDITIONAL INFORMATION

IS CERAMIC COATING WORTH IT?
WHAT ARE THE BENEFITS OF CERAMIC COATING FOR CARS?
BREAKING DOWN THE COST OF CERAMIC COATING 2022

FAQ

Book Your Ceramic Coating Today – Protect Your Investment for the Next Years.

How much does MG ceramic coating cost in Vancouver?

MG ceramic coating at Gleamworks costs $600–$2,200 for a compact car. The final quote depends on paint condition, coating term, and how much correction the paint needs first. We machine-polish swirl marks, oxidation, and old wash damage before coating, so the finish has a clean base rather than sealing defects in.

Should I use an MG paint shop for ceramic coating?

No new-car dealer package exists for an MG here, so compare specialist installers with generic paint shops. A lower quote may mean less paint prep, a shorter-lived product, or no correction work. Gleamworks offers in-house polishing and uses CQuartz Professional, Gtechniq Crystal Serum Ultra, Revivify, and graphene coatings. The price difference should buy careful prep and clear aftercare.

What is the downside of ceramic coating an MG?

The real downside is cost and prep time. Ceramic coating is not scratch-proof, and it will not stop stone chips, deep scratches, or dents. It also makes existing flaws clearer if the paint is not corrected first. A poor install can leave high spots or uneven gloss, which may need machine polishing to remove.

How long does ceramic coating last on an MG?

A properly maintained coating can last from 9–18 months to up to 9 years. Gleamworks offers 1-year, 5-year, 7-year, and 9-year options. Sun exposure, dirty brush washes, harsh chemicals, tree sap, bird mess, and skipped washing shorten its life. Garage-kept cars with gentle washing generally keep their water behaviour and gloss longer.

What can ruin an MG ceramic coating?

Abrasive brush washes, dirty mitts, harsh acidic or alkaline cleaners, undiluted degreasers, and polishing compounds can damage a coating. Letting bird droppings, tree sap, or mineral-rich water dry on the paint can also stain the surface. Remove contamination promptly, use pH-balanced wash soap, and avoid rubbing gritty paint dry.

Can I take my MG through a car wash?

Yes, but hand washing is safest and touchless washes are the next best choice. Avoid tunnel washes with spinning brushes because they drag grit across the paint and cause swirls. Pressure washers are safe with sensible use, but do not hold the nozzle close to aged trim, decals, loose paint, or vulnerable seams.

Is ceramic coating worth it for an MG in Vancouver?

Yes, if you want easier cleaning and less wash-induced marring in a wet climate. Vancouver receives 1,159.5 mm of precipitation over 169.5 days each year. Rain that sits can leave mineral spots, while winter brine builds up around wheel wells and rockers. Coating will not stop corrosion in chips, but it makes routine cleaning less punishing.

Does ceramic coating help preserve original MG paint?

Yes, especially where original paint is hard to match or replace. A coating helps reduce wash marks, grime bonding, and staining, but it cannot restore failed paint or hide prior repairs. It may help avoid some future reconditioning; repainting one panel in Metro Vancouver typically costs $600–$1,500. For an enthusiast import, preserving sound original paint matters more than making resale promises.

REQUEST AN APPOINTMENT ONLINE

After you submit the form, a representative will call you back with the information you’ll need to make an appointment.





    Please prove you are human by selecting the cup.

    ▲
    Cart
    Call Now