Gleamworks

Mitsubishi Ceramic Coating

Speak with Gleamworks before you book paint work or buy a kit. We have protected more than 2,000 vehicles across nine years, and we can inspect your Mitsubishi, its paint condition, and the roads it sees. Call 604-789-0762 or visit 5-8855 Laurel Street, Vancouver, BC V6P 3V9. Bring photos of chips or wash marks if you want us to plan correction and protection together.
Rolls-Royce-ceramic-coating

WHAT IS CERAMIC COATING?

Start with the cost. A published five-year coating installation runs $1,200–$2,500, while repainting one panel at a local body shop typically falls in the range of $600–$1,500. Mitsubishi Ceramic Coating is not chip protection. It is a thin, hard sacrificial layer over clean paint that resists light marring and makes routine wash grime less likely to cling. On an Outlander, RVR, or Eclipse Cross, that matters when you plan to keep the original paint rather than spend later on correction and repaint work. We inspect the paint first, then machine-polish out swirl marks, spider-webbing, and oxidation that a coating would otherwise lock beneath it. We do that work in-house before any layer goes on. Decide first if your paint needs correction for old wash marks and dullness before we protect it.
System x accredited installation center
Gtechniq Logo
carpro approved detailing centre
revivify coatings logo

WHY TO CHOOSE PREMIUM COATING?

Stone chips on the Sea-to-Sky Highway need a different answer. A ceramic layer does not stop a stone strike, so it should not be sold as the answer for frequent runs on one of the province’s worst chip roads. Mitsubishi owners who keep their cars past 10 years need to weigh the front end separately from the painted surfaces they wash each week. We stock XPEL, STEK DYNOshield, and SunTek film for impact areas; its manufacturer warranty can run up to 9 years. If you are comparing Mitsubishi ceramic coatings Markham, ask what the shop proposes for the bumper and front edge of the hood. This coast sees 169.5 days of measurable precipitation a year, and water can sit in a fresh chip before it dries. Winter freeze-thaw lets water work into a chip and expand. On the Sea-to-Sky Highway, grit keeps hitting those same front areas before your next wash.

CERAMIC COATINGS BENEFITS

Rain changes the care plan more than bright sun does here. Of the annual precipitation, 1,119.2 mm falls as rain, leaving standing water on roofs, mirrors, and hatch seams after a wet week. The layer helps you wash away road dirt, pollen, sap, and dry mineral marks with less rubbing, but you still need to wash it. Mitsubishi car detailing should start with a close look at the paint, especially around rocker panels and the loading lip where winter brine stays. Cottonwood fluff in June and heavy pollen in April and May can add to that wash load. We use CQuartz Professional, Gtechniq Crystal Serum Ultra, and Revivify options after in-house machine polishing; we also offer a graphene coating. Wheel and glass coatings can round out the work where water and brake dust build up. Choose the service scope by how you park and wash, not by the longest label.

1

+

Happy Clients

1

%

Customer Satisfaction

PRICING FOR Mitsubishi

PREMIUM ELITE

Premium Package

Gtechniq Crystal Serum Ultra

Standard

  • Made in the UK. A super‑slick, ultra‑gloss finish achieved through a multi‑step, 2‑day process:
  • Car wash – removes road grime
  • Chemical decontamination – removes brake dust, tar, waxes, sealants, oxidation, etc.
  • Paint polishing – corrects light scratches and swirl marks
  • All paintwork, chrome, plastic, and metal covered with Crystal Serum Ultra
  • 1 layer of Gtechniq EXOv4 applied on top for extra hydrophobic properties

$1699

GET A QUOTE

Big

  • Made in the UK. A super‑slick, ultra‑gloss finish achieved through a multi‑step, 2‑day process:
  • Car wash – removes road grime
  • Chemical decontamination – removes brake dust, tar, waxes, sealants, oxidation, etc.
  • Paint polishing – corrects light scratches and swirl marks
  • All paintwork, chrome, plastic, and metal covered with Crystal Serum Ultra
  • 1 layer of Gtechniq EXOv4 applied on top for extra hydrophobic properties

$1899

GET A QUOTE

Large

  • Made in the UK. A super‑slick, ultra‑gloss finish achieved through a multi‑step, 2‑day process:
  • Car wash – removes road grime
  • Chemical decontamination – removes brake dust, tar, waxes, sealants, oxidation, etc.
  • Paint polishing – corrects light scratches and swirl marks
  • All paintwork, chrome, plastic, and metal covered with Crystal Serum Ultra
  • 1 layer of Gtechniq EXOv4 applied on top for extra hydrophobic properties

$2099

GET A QUOTE

ADDITIONAL OPTIONS

Wheels coating – $400

Glass coating – $199

Interior protection – $299

* Official warranty and eligible for ICBC claims for reapplication if car accidents occur.

** Vehicles must be clean prior to service. Car wash is an additional $50.

*** Prices listed are estimates. Please book a free assessment for an accurate estimate.

Elite Package

CarPro CQuartz Professional

Standard

  • Process needs 2 – 3 days to get the following steps done:
  • All exterior and interior surfaces cleaned and decontaminated
  • Paint Correction for Added Depth, Light Swirl Removal
  • 1 layer of CarPro gloss enhancement primer applied to all painted surfaces
  • 2 layers of C.Quartz Professional – Applied to all Painted and Metal Surfaces including Wheels (front facing)
  • 1 layer of C.Quartz DLUX – Applied to all Exterior Plastic Surfaces
  • 1 layer of Silica sealant to all surfaces

$1699

GET A QUOTE

Big

  • Process needs 2 – 3 days to get the following steps done:
  • All exterior and interior surfaces cleaned and decontaminated
  • Paint Correction for Added Depth, Light Swirl Removal
  • 1 layer of CarPro gloss enhancement primer applied to all painted surfaces
  • 2 layers of C.Quartz Professional – Applied to all Painted and Metal Surfaces including Wheels (front facing)
  • 1 layer of C.Quartz DLUX – Applied to all Exterior Plastic Surfaces
  • 1 layer of Silica sealant to all surfaces

$1899

GET A QUOTE

Large

  • Process needs 2 – 3 days to get the following steps done:
  • All exterior and interior surfaces cleaned and decontaminated
  • Paint Correction for Added Depth, Light Swirl Removal
  • 1 layer of CarPro gloss enhancement primer applied to all painted surfaces
  • 2 layers of C.Quartz Professional – Applied to all Painted and Metal Surfaces including Wheels (front facing)
  • 1 layer of C.Quartz DLUX – Applied to all Exterior Plastic Surfaces
  • 1 layer of Silica sealant to all surfaces

$2099

GET A QUOTE

If your car is an extension of yourself and you want something exceptional, choose CarPro. This is our most comprehensive correction, detailing, and protection package — delivered by certified professionals at a limited number of approved centres. The C.Quartz Professional package gives you complete care plus guidance on maintenance routines that can extend protection for up to 10 years.

ADDITIONAL OPTIONS

CQuartz leather ceramic coating

Upholstery and Carpets Protection with CQuartz Fabric

* Official warranty and eligible for ICBC claims for reapplication if car accidents occur.

** Vehicles must be clean prior to service. Car wash is an additional $50.

*** Prices listed are estimates. Please book a free assessment for an accurate estimate.

ADDITIONAL INFORMATION

IS CERAMIC COATING WORTH IT?
WHAT ARE THE BENEFITS OF CERAMIC COATING FOR CARS?
BREAKING DOWN THE COST OF CERAMIC COATING 2022

FAQ

Book Your Ceramic Coating Today – Protect Your Investment for the Next Years.

How much does Mitsubishi ceramic coating cost?

Gleamworks charges $600–$2,200 installed for a sedan or compact Mitsubishi, and $1,000–$2,800 for an SUV or crossover. An Outlander, RVR, or Eclipse Cross usually falls into the SUV or crossover range. The final quote depends on paint condition, coating choice, and whether the paint needs correction before coating.

Is dealer ceramic coating worth it for Mitsubishi?

Usually, take the dealer package only if it clearly states the product, term, prep work, and warranty in writing. A dealer coating is often sold at delivery, before anyone assesses the paint. Gleamworks’ five-year coating range is $1,200–$2,500. Any price gap should buy coating choice, in-house paint correction where needed, and a clear record of the work done.

What are the downsides of ceramic coating a Mitsubishi?

The main drawbacks are the upfront cost and the prep work. Ceramic coating is not scratch-proof, and a deep scratch, rock chip, or parking-lot scrape can still damage the paint beneath it. It adds a thin, hard sacrificial layer that resists light marring. A cheap install over swirls or contamination can look worse than leaving the paint alone.

How long does Mitsubishi ceramic coating last?

With proper washing, the one-year option lasts 9–18 months. A five-year coating lasts 3–5 years, a seven-year option lasts 5–7 years, and a nine-year coating can last up to 9 years with maintenance. Neglected washes, abrasive brushes, harsh chemicals, bird droppings, and skipped decontamination shorten the working life.

What can ruin a ceramic coating?

Avoid automatic brush washes, abrasive polishes, harsh degreasers, and dirty wash mitts. Do not let bird droppings, tree sap, or mineral-heavy water dry on the paint for long periods. Polishing a coated panel removes coating from that area, so it needs recoating. Ceramic coating reduces how strongly dirt sticks, but it does not make wash mistakes harmless.

Can I use car washes after coating my Mitsubishi?

Yes, touchless washes are generally safe, and careful hand washing is the best choice. Use a clean mitt, pH-balanced car shampoo, and separate wheel tools from paint tools. Pressure washing is fine if you keep the nozzle moving and avoid blasting damaged paint, trim edges, or badges at close range. Avoid automatic tunnel brushes because they can add light marring.

Is ceramic coating worth it on a Mitsubishi in Vancouver?

In Vancouver, it is a practical cleaning and paint-care upgrade, not chip protection. The city receives 1,159.5 mm of precipitation yearly across 169.5 days with measurable precipitation. That leaves frequent water spotting and grime. Highway 1 through the Fraser Valley also throws grit at front paint, which coating will not stop, so frequent drivers may pair coating with front-end film.

Does ceramic coating help Mitsubishi resale or lease return?

For a Mitsubishi kept beyond its powertrain warranty, coating can help keep the paint easier to clean and reduce light wash marring. Do not treat a coating warranty as Mitsubishi vehicle warranty coverage, and read lease return terms carefully. It cannot erase chips or dents. Avoiding reconditioning may matter, since repainting one panel typically costs $600–$1,500 in Metro Vancouver.

REQUEST AN APPOINTMENT ONLINE

After you submit the form, a representative will call you back with the information you’ll need to make an appointment.





    Please prove you are human by selecting the cup.

    ▲
    Cart
    Call Now