Gleamworks

Peugeot Ceramic Coating

Bring your Peugeot to Gleamworks Ceramic, 5-8855 Laurel Street, for a paint check before booking. We have protected 2,000+ vehicles over nine years, and we set out the prep, coating term, and cost before work begins. Call 604-789-0762 to arrange an inspection. We also explain what a coating cannot handle, so you can choose film only where the car needs it.
Rolls-Royce-ceramic-coating

WHAT IS CERAMIC COATING?

Most owners are weighing a low-price job against a studio that corrects the paint before it seals it. For an enthusiast-import Peugeot, that choice matters: keeping original panels in good order avoids a search for parts that may be scarce here. A ceramic coating is a liquid layer that bonds to prepared paint. It adds a thin, hard sacrificial layer that resists light marring and helps grime release during washing. It cannot stop a stone strike or replace washing. Peugeot detailing at Gleamworks starts with an inspection, then in-house machine polishing where the paint needs it. We remove swirl marks, spider-webbing, and oxidation before we apply CQuartz Professional, Gtechniq Crystal Serum Ultra, Revivify, or a graphene coating. A 5-year coating costs $1,200–$2,500 installed and lasts 3–5 years. Ask us to assess the paint before you choose a coating term.
System x accredited installation center
Gtechniq Logo
carpro approved detailing centre
revivify coatings logo

WHY TO CHOOSE PREMIUM COATING?

Vancouver records 169.5 days each year with measurable precipitation, so a classic that sits outside often stays damp long after a drive. Water can dry into mineral marks; in shaded parking, moss or algae can form around damp areas. The city’s winter lows sit in the freeze-thaw band rather than deep cold. Water in an existing chip can expand, and a neglected chip can turn into rust. For Peugeot Vancouver owners, a cheap job can leave swirls and oxidation beneath the coating. Gleamworks corrects those faults in house rather than asking a coating to hide them. For a car that uses a downtown tower parkade, we check each panel for drip marks, overspray, and construction dust before any prep starts. A 5-year coating works out to $300–$550 a year, versus $600–$1,200 a year for repeat 1-year products.

CERAMIC COATINGS BENEFITS

Protection has limits, and that is useful to know before you spend money. A coating helps reduce light wash marring, makes routine cleaning easier, and keeps dirt from sticking as firmly to prepared paint. It cannot stop every scratch during use. It will not stop grit, salt spray on a ferry deck, or a sharp chip at the front of the car. For that risk, we can discuss paint protection film on the areas that take impact. If a Peugeot CA search brought you here, bring the car in rather than judging its paint under parkade lights. We inspect the condition and match the work to it. A two-stage paint correction typically falls in the range of $600–$1,600, based on size and condition. A panel repaint is typically in the range of $600–$1,500. Saving sound original paint may avoid that reconditioning bill.

1

+

Happy Clients

1

%

Customer Satisfaction

PRICING FOR Peugeot

PREMIUM ELITE

Premium Package

Gtechniq Crystal Serum Ultra

Standard

  • Made in the UK. A super‑slick, ultra‑gloss finish achieved through a multi‑step, 2‑day process:
  • Car wash – removes road grime
  • Chemical decontamination – removes brake dust, tar, waxes, sealants, oxidation, etc.
  • Paint polishing – corrects light scratches and swirl marks
  • All paintwork, chrome, plastic, and metal covered with Crystal Serum Ultra
  • 1 layer of Gtechniq EXOv4 applied on top for extra hydrophobic properties

$1699

GET A QUOTE

Big

  • Made in the UK. A super‑slick, ultra‑gloss finish achieved through a multi‑step, 2‑day process:
  • Car wash – removes road grime
  • Chemical decontamination – removes brake dust, tar, waxes, sealants, oxidation, etc.
  • Paint polishing – corrects light scratches and swirl marks
  • All paintwork, chrome, plastic, and metal covered with Crystal Serum Ultra
  • 1 layer of Gtechniq EXOv4 applied on top for extra hydrophobic properties

$1899

GET A QUOTE

Large

  • Made in the UK. A super‑slick, ultra‑gloss finish achieved through a multi‑step, 2‑day process:
  • Car wash – removes road grime
  • Chemical decontamination – removes brake dust, tar, waxes, sealants, oxidation, etc.
  • Paint polishing – corrects light scratches and swirl marks
  • All paintwork, chrome, plastic, and metal covered with Crystal Serum Ultra
  • 1 layer of Gtechniq EXOv4 applied on top for extra hydrophobic properties

$2099

GET A QUOTE

ADDITIONAL OPTIONS

Wheels coating – $400

Glass coating – $199

Interior protection – $299

* Official warranty and eligible for ICBC claims for reapplication if car accidents occur.

** Vehicles must be clean prior to service. Car wash is an additional $50.

*** Prices listed are estimates. Please book a free assessment for an accurate estimate.

Elite Package

CarPro CQuartz Professional

Standard

  • Process needs 2 – 3 days to get the following steps done:
  • All exterior and interior surfaces cleaned and decontaminated
  • Paint Correction for Added Depth, Light Swirl Removal
  • 1 layer of CarPro gloss enhancement primer applied to all painted surfaces
  • 2 layers of C.Quartz Professional – Applied to all Painted and Metal Surfaces including Wheels (front facing)
  • 1 layer of C.Quartz DLUX – Applied to all Exterior Plastic Surfaces
  • 1 layer of Silica sealant to all surfaces

$1699

GET A QUOTE

Big

  • Process needs 2 – 3 days to get the following steps done:
  • All exterior and interior surfaces cleaned and decontaminated
  • Paint Correction for Added Depth, Light Swirl Removal
  • 1 layer of CarPro gloss enhancement primer applied to all painted surfaces
  • 2 layers of C.Quartz Professional – Applied to all Painted and Metal Surfaces including Wheels (front facing)
  • 1 layer of C.Quartz DLUX – Applied to all Exterior Plastic Surfaces
  • 1 layer of Silica sealant to all surfaces

$1899

GET A QUOTE

Large

  • Process needs 2 – 3 days to get the following steps done:
  • All exterior and interior surfaces cleaned and decontaminated
  • Paint Correction for Added Depth, Light Swirl Removal
  • 1 layer of CarPro gloss enhancement primer applied to all painted surfaces
  • 2 layers of C.Quartz Professional – Applied to all Painted and Metal Surfaces including Wheels (front facing)
  • 1 layer of C.Quartz DLUX – Applied to all Exterior Plastic Surfaces
  • 1 layer of Silica sealant to all surfaces

$2099

GET A QUOTE

If your car is an extension of yourself and you want something exceptional, choose CarPro. This is our most comprehensive correction, detailing, and protection package — delivered by certified professionals at a limited number of approved centres. The C.Quartz Professional package gives you complete care plus guidance on maintenance routines that can extend protection for up to 10 years.

ADDITIONAL OPTIONS

CQuartz leather ceramic coating

Upholstery and Carpets Protection with CQuartz Fabric

* Official warranty and eligible for ICBC claims for reapplication if car accidents occur.

** Vehicles must be clean prior to service. Car wash is an additional $50.

*** Prices listed are estimates. Please book a free assessment for an accurate estimate.

ADDITIONAL INFORMATION

IS CERAMIC COATING WORTH IT?
WHAT ARE THE BENEFITS OF CERAMIC COATING FOR CARS?
BREAKING DOWN THE COST OF CERAMIC COATING 2022

FAQ

Book Your Ceramic Coating Today – Protect Your Investment for the Next Years.

How much does Peugeot ceramic coating cost?

$600–$2,200 is the installed range for a compact or sedan-sized Peugeot. Larger SUV or crossover-sized vehicles run $1,000–$2,800. The final price depends on paint condition, correction work, and whether you choose a 1-, 5-, 7-, or 9-year coating. Gleamworks corrects swirls and oxidation before coating, rather than sealing them in.

Should I use a generic paint shop for Peugeot coating?

No, compare the scope before choosing a lower quote. Since Peugeot is not sold new in Canada, this is not a dealer-package decision. Ask whether the price includes decontamination, machine polishing, coating prep, and the coating term. Gleamworks does paint correction in-house and installs CQuartz Professional, Gtechniq Crystal Serum Ultra, Revivify, and graphene options.

What are the downsides of ceramic coating a Peugeot?

The downside is cost and prep work. A coating is not scratch-proof, and it will not stop stone chips or repair failing paint. It adds a thin, hard sacrificial layer that resists light marring, but poor washing can still mark it. A cheap install can also leave swirls, water spots, or poor prep locked beneath the coating.

How long does Peugeot ceramic coating last?

Expect 9–18 months from a 1-year coating, 3–5 years from a 5-year coating, 5–7 years from a 7-year coating, and up to 9 years from a maintained 9-year coating. Harsh wash chemicals, abrasive brushes, neglected sap, and skipped maintenance shorten that life. Garaged cars usually face less exposure, but age and paint condition still matter.

What damages a Peugeot ceramic coating?

Abrasive tunnel brushes, cutting polish, strong acid or alkaline cleaners, and dried bird droppings or tree sap do the most harm. Do not scrub grit from dry paint, and do not use a dirty wash mitt. Ceramic coating makes cleaning easier, but contamination still needs prompt removal before it bonds, etches, or marks the surface.

Can I take a coated Peugeot through car washes?

Hand washing is the safest choice, using a clean mitt and pH-neutral soap. Touchless bays are generally safer than brush tunnels, though repeated strong detergents can reduce water behaviour over time. Pressure washing is fine on sound paint if you keep the nozzle moving and do not hold it close to one spot. Dry with clean microfiber towels.

Is ceramic coating worth it on a Peugeot in Vancouver?

Yes, for a regularly driven Peugeot, but it is a cleaning and paint-care tool rather than chip protection. Vancouver receives 1,159.5 mm of precipitation across 169.5 days each year. Rain left to dry can leave mineral spotting, while Cypress Mountain trips add sand and salt. Coating helps release grime, but wash the car after winter road exposure.

Does ceramic coating help Peugeot collector value?

Yes, preserving original paint can help an enthusiast import avoid visible reconditioning later. A repaint of one panel in Metro Vancouver is typically in the range of $600–$1,500. Coating will not erase chips or make old paint new, but it can reduce routine wash marring and make careful cleaning easier. Document the paint condition before correction and coating.

REQUEST AN APPOINTMENT ONLINE

After you submit the form, a representative will call you back with the information you’ll need to make an appointment.





    Please prove you are human by selecting the plane.

    ▲
    Cart
    Call Now