Gleamworks

Shelby Ceramic Coating

Gleamworks is at 5-8855 Laurel Street. We have protected 2,000+ cars over 9 years, and we inspect the paint before we quote coating work. Shelby Detailing can begin with photos, but an in-person look shows set-in deposits, wash marks, and panels that need film. Call 604-789-0762 to arrange an inspection. You will know whether correction, coating, or film fits each panel.
Rolls-Royce-ceramic-coating

WHAT IS CERAMIC COATING?

Start with the panel map. On a Mustang GT500, the front bumper, hood edge, rocker panels, and lower doors see the first grit. On a Shelby F-150, the hood edge, front bumper, rocker panels, and tailgate lip need the same check. Highway 1 through the Fraser Valley sends grit into those low areas, while rain dries on the flat hood and stripe edges. The local airport records measurable precipitation on 169.5 days a year, so water often sits long enough to leave mineral deposits. Shelby Ceramic Coating is a liquid layer cured over prepared paint; it helps water release more easily and resists light wash marks. It will not stop a stone chip. A Shelby ceramic coating application starts with a wash, decontamination, and a close look at the panels that need film instead. Book an assessment if chips already mark the nose or rocker panels.
System x accredited installation center
Gtechniq Logo
carpro approved detailing centre
revivify coatings logo

WHY TO CHOOSE PREMIUM COATING?

Cost should drive the term you choose, not a promise on a bottle. Our 5-year coating is $1,200–$2,500 installed, or $300–$550 a year. Repeat 1-year products run $600–$1,200 a year, so the longer term can cost less over time. A Shelby ceramic coating review should say whether the shop corrected the paint first. We do that work in-house, using machine polishing to remove swirl marks, spider-webbing, and oxidation before the coating goes on. The local climate gets 1,937.5 hours of sun a year, only 40.6% of what is possible. Deep colours and wide stripes show old wash marks as soon as the paint is clean. Shelby ceramic work is best timed before those marks build into a correction job. The right term depends on paint condition and where the truck or car is parked.

CERAMIC COATINGS BENEFITS

Rain is the main reason to coat paint here, but only after we fix what is already on it. The local airport records 1,119.2 mm of rain each year. When water sits on a hood, roof, or stripe and then dries, it can leave mineral deposits. The coating makes routine washing easier and adds a thin, hard sacrificial layer that resists light marring. It does not end washing, stop stone chips, or erase deposits that have already set. Shelby Auto Detailing should include a clear answer on those limits, especially for a car parked under cover that drips or beside trees. We apply CQuartz Professional, Gtechniq Crystal Serum Ultra, Revivify self-healing ceramic, and graphene coating options after correction. Shelby Car Detailing also needs a plan for impact areas: film on the nose or rocker panels handles strikes that ceramic cannot. A chip touch-up visit at most shops here typically falls in the range of $75–$250. That panel map keeps impact protection separate from wash protection.

1

+

Happy Clients

1

%

Customer Satisfaction

PRICING FOR Shelby

PREMIUM ELITE

Premium Package

Gtechniq Crystal Serum Ultra

Standard

  • Made in the UK. A super‑slick, ultra‑gloss finish achieved through a multi‑step, 2‑day process:
  • Car wash – removes road grime
  • Chemical decontamination – removes brake dust, tar, waxes, sealants, oxidation, etc.
  • Paint polishing – corrects light scratches and swirl marks
  • All paintwork, chrome, plastic, and metal covered with Crystal Serum Ultra
  • 1 layer of Gtechniq EXOv4 applied on top for extra hydrophobic properties

$1699

GET A QUOTE

Big

  • Made in the UK. A super‑slick, ultra‑gloss finish achieved through a multi‑step, 2‑day process:
  • Car wash – removes road grime
  • Chemical decontamination – removes brake dust, tar, waxes, sealants, oxidation, etc.
  • Paint polishing – corrects light scratches and swirl marks
  • All paintwork, chrome, plastic, and metal covered with Crystal Serum Ultra
  • 1 layer of Gtechniq EXOv4 applied on top for extra hydrophobic properties

$1899

GET A QUOTE

Large

  • Made in the UK. A super‑slick, ultra‑gloss finish achieved through a multi‑step, 2‑day process:
  • Car wash – removes road grime
  • Chemical decontamination – removes brake dust, tar, waxes, sealants, oxidation, etc.
  • Paint polishing – corrects light scratches and swirl marks
  • All paintwork, chrome, plastic, and metal covered with Crystal Serum Ultra
  • 1 layer of Gtechniq EXOv4 applied on top for extra hydrophobic properties

$2099

GET A QUOTE

ADDITIONAL OPTIONS

Wheels coating – $400

Glass coating – $199

Interior protection – $299

* Official warranty and eligible for ICBC claims for reapplication if car accidents occur.

** Vehicles must be clean prior to service. Car wash is an additional $50.

*** Prices listed are estimates. Please book a free assessment for an accurate estimate.

Elite Package

CarPro CQuartz Professional

Standard

  • Process needs 2 – 3 days to get the following steps done:
  • All exterior and interior surfaces cleaned and decontaminated
  • Paint Correction for Added Depth, Light Swirl Removal
  • 1 layer of CarPro gloss enhancement primer applied to all painted surfaces
  • 2 layers of C.Quartz Professional – Applied to all Painted and Metal Surfaces including Wheels (front facing)
  • 1 layer of C.Quartz DLUX – Applied to all Exterior Plastic Surfaces
  • 1 layer of Silica sealant to all surfaces

$1699

GET A QUOTE

Big

  • Process needs 2 – 3 days to get the following steps done:
  • All exterior and interior surfaces cleaned and decontaminated
  • Paint Correction for Added Depth, Light Swirl Removal
  • 1 layer of CarPro gloss enhancement primer applied to all painted surfaces
  • 2 layers of C.Quartz Professional – Applied to all Painted and Metal Surfaces including Wheels (front facing)
  • 1 layer of C.Quartz DLUX – Applied to all Exterior Plastic Surfaces
  • 1 layer of Silica sealant to all surfaces

$1899

GET A QUOTE

Large

  • Process needs 2 – 3 days to get the following steps done:
  • All exterior and interior surfaces cleaned and decontaminated
  • Paint Correction for Added Depth, Light Swirl Removal
  • 1 layer of CarPro gloss enhancement primer applied to all painted surfaces
  • 2 layers of C.Quartz Professional – Applied to all Painted and Metal Surfaces including Wheels (front facing)
  • 1 layer of C.Quartz DLUX – Applied to all Exterior Plastic Surfaces
  • 1 layer of Silica sealant to all surfaces

$2099

GET A QUOTE

If your car is an extension of yourself and you want something exceptional, choose CarPro. This is our most comprehensive correction, detailing, and protection package — delivered by certified professionals at a limited number of approved centres. The C.Quartz Professional package gives you complete care plus guidance on maintenance routines that can extend protection for up to 10 years.

ADDITIONAL OPTIONS

CQuartz leather ceramic coating

Upholstery and Carpets Protection with CQuartz Fabric

* Official warranty and eligible for ICBC claims for reapplication if car accidents occur.

** Vehicles must be clean prior to service. Car wash is an additional $50.

*** Prices listed are estimates. Please book a free assessment for an accurate estimate.

ADDITIONAL INFORMATION

IS CERAMIC COATING WORTH IT?
WHAT ARE THE BENEFITS OF CERAMIC COATING FOR CARS?
BREAKING DOWN THE COST OF CERAMIC COATING 2022

FAQ

Book Your Ceramic Coating Today – Protect Your Investment for the Next Years.

How much does Shelby ceramic coating cost in Vancouver?

$600–$3,200 installed is Gleamworks’ published range, based on vehicle size, coating term, and paint condition. A Mustang GT500 falls within the sedan and compact range of $600–$2,200. A Shelby F-150 falls within the full-size truck range of $1,300–$3,200. Paint correction is assessed before coating if swirls or oxidation need removal.

Is the dealer ceramic coating worth it?

Usually, no, unless the dealer provides clear details on the product, paint prep, installer, and aftercare. Gleamworks offers CQuartz Professional, Gtechniq Crystal Serum Ultra, Revivify, and graphene coatings. The price gap should buy proper wash prep, decontamination, and machine polishing where the paint needs it. Ask both parties exactly what correction work is included.

What are ceramic coating drawbacks for Shelby?

The main drawback is cost and prep time. Ceramic coating adds a thin, hard sacrificial layer that resists light marring, but it is not scratch-proof. It will not stop stone chips, and poor washing can still mark it. If a Shelby has swirls or oxidation, correction must happen first, which adds labour before the coating goes on.

How long does Shelby ceramic coating last?

Expect a 1-year coating to last 9–18 months, while a 5-year option lasts 3–5 years. A 7-year coating lasts 5–7 years, and a 9-year coating can last up to 9 years with maintenance. Abrasive washing, missed decontamination, tree sap, and hard-water spotting shorten that life. Exposure and care matter more than the Shelby badge.

What ruins a Shelby ceramic coating?

Avoid brush tunnels, dirty wash mitts, strong alkaline cleaners, and scraping ice across painted panels. Do not leave bird droppings, cedar or fir sap, pollen, or mineral spots to bake in the sun. Coating contamination left too long can etch or stain the surface. Wash contaminants off promptly and use clean tools for every contact wash.

Can I wash a ceramic-coated Shelby?

Touchless washes are the safer automatic option, but hand washing is best when done with clean mitts and proper lubrication. A pressure washer is safe if you keep it moving and avoid aiming closely at trim edges, badges, and damaged paint. Skip brush washes. Ceramic coating makes washing easier, but it does not remove the need to wash the vehicle.

Is ceramic coating worth it on a Shelby in Vancouver?

Yes, especially for a Shelby driven year-round or parked outside. Vancouver receives 1,159.5 mm of precipitation over 169.5 days each year, so rainwater and mineral spotting are regular concerns. Sea-to-Sky Highway grit adds another risk on weekend drives. Coating helps make road film, pollen, sap, and standing-water residue easier to remove before they bond to the paint.

Does ceramic coating help Shelby resale?

It can reduce the reconditioning work a buyer or dealer may see, especially on deep colours and stripe edges. A coating cannot promise a resale price, but preserved original paint may help avoid repaint work. Repainting one panel at a Metro Vancouver body shop typically costs $600–$1,500. Regular washing and prompt chip repair still matter for a low-volume Shelby.

REQUEST AN APPOINTMENT ONLINE

After you submit the form, a representative will call you back with the information you’ll need to make an appointment.





    Please prove you are human by selecting the car.

    ▲
    Cart
    Call Now