Gleamworks

Smart Ceramic Coating

At Gleamworks Ceramic, we inspect the paint before we quote, so you know whether correction, coating, or film belongs on each area. We have protected 2,000+ cars in nine years. For a discontinued Smart, that check separates marks that need correction from paint ready for coating. Call 604-789-0762 to book an assessment and decide if coating alone suits how you use your car.
Rolls-Royce-ceramic-coating

WHAT IS CERAMIC COATING?

Start with repair cost. Our published sedan and compact coating prices run $600–$2,200, while repainting one panel at a Metro Vancouver body shop typically runs $600–$1,500. Smart ceramic coating is a clear protective layer applied over prepared paint. It adds a thin, hard sacrificial layer that resists light marring and helps dirt release during washing. It cannot stop a stone chip or make washing optional. We machine-polish in house before coating, removing swirl marks, spider-webbing, and oxidation that would otherwise remain under it. The tridion safety cell and contrast body panels are the brand signature, so a tidy finish matters on these cars. For Smart car detailing, we inspect the paint and panel edges first, then explain what correction and coating will address. Keep coating for easier cleaning and light marring; put film on impact areas if chip control is the main need.
System x accredited installation center
Gtechniq Logo
carpro approved detailing centre
revivify coatings logo

WHY TO CHOOSE PREMIUM COATING?

Stone chips set the limit on what a coating can do. On the Sea-to-Sky Highway between Horseshoe Bay and Squamish, grit can strike the low front end before you arrive. Ceramic will not absorb that impact, so we suggest film on the bumper and other impact areas where chip marks already start. Vancouver records 169.5 days with measurable precipitation in a year. Water then sits in chips, dries into mineral spots, and feeds moss or algae in shaded parking. In winter, water can work into an existing chip and expand through freeze-thaw cycles. A Smart detail should include a close look at old chips before we seal the surrounding paint. If a chip has broken through the paint, repair it first; coating over damage does not fix it. Choose coating for wet-weather cleaning, and add film where the road throws stones.

CERAMIC COATINGS BENEFITS

Daily washing gets simpler when road film, spring pollen, and June cottonwood fluff release with less effort. The coating does not keep dirt off your Smart, but it gives you a smoother sacrificial surface to wash without grinding grit across paint. Smart detailing is more than applying a bottle product. We use CQuartz Professional, Gtechniq Crystal Serum Ultra, and Revivify, then match the choice to paint condition, use, and where you park. A 5-year installed coating costs $1,200–$2,500 and works out to $300–$550 a year. Repeat 1-year products run $600–$1,200 a year, based on our published figures. If you are pricing Smart elite detailing, ask whether the quote includes machine polishing before the coating. A lower quote that skips correction leaves existing swirl marks in place.

1

+

Happy Clients

1

%

Customer Satisfaction

PRICING FOR Smart

PREMIUM ELITE

Premium Package

Gtechniq Crystal Serum Ultra

Standard

  • Made in the UK. A super‑slick, ultra‑gloss finish achieved through a multi‑step, 2‑day process:
  • Car wash – removes road grime
  • Chemical decontamination – removes brake dust, tar, waxes, sealants, oxidation, etc.
  • Paint polishing – corrects light scratches and swirl marks
  • All paintwork, chrome, plastic, and metal covered with Crystal Serum Ultra
  • 1 layer of Gtechniq EXOv4 applied on top for extra hydrophobic properties

$1699

GET A QUOTE

Big

  • Made in the UK. A super‑slick, ultra‑gloss finish achieved through a multi‑step, 2‑day process:
  • Car wash – removes road grime
  • Chemical decontamination – removes brake dust, tar, waxes, sealants, oxidation, etc.
  • Paint polishing – corrects light scratches and swirl marks
  • All paintwork, chrome, plastic, and metal covered with Crystal Serum Ultra
  • 1 layer of Gtechniq EXOv4 applied on top for extra hydrophobic properties

$1899

GET A QUOTE

Large

  • Made in the UK. A super‑slick, ultra‑gloss finish achieved through a multi‑step, 2‑day process:
  • Car wash – removes road grime
  • Chemical decontamination – removes brake dust, tar, waxes, sealants, oxidation, etc.
  • Paint polishing – corrects light scratches and swirl marks
  • All paintwork, chrome, plastic, and metal covered with Crystal Serum Ultra
  • 1 layer of Gtechniq EXOv4 applied on top for extra hydrophobic properties

$2099

GET A QUOTE

ADDITIONAL OPTIONS

Wheels coating – $400

Glass coating – $199

Interior protection – $299

* Official warranty and eligible for ICBC claims for reapplication if car accidents occur.

** Vehicles must be clean prior to service. Car wash is an additional $50.

*** Prices listed are estimates. Please book a free assessment for an accurate estimate.

Elite Package

CarPro CQuartz Professional

Standard

  • Process needs 2 – 3 days to get the following steps done:
  • All exterior and interior surfaces cleaned and decontaminated
  • Paint Correction for Added Depth, Light Swirl Removal
  • 1 layer of CarPro gloss enhancement primer applied to all painted surfaces
  • 2 layers of C.Quartz Professional – Applied to all Painted and Metal Surfaces including Wheels (front facing)
  • 1 layer of C.Quartz DLUX – Applied to all Exterior Plastic Surfaces
  • 1 layer of Silica sealant to all surfaces

$1699

GET A QUOTE

Big

  • Process needs 2 – 3 days to get the following steps done:
  • All exterior and interior surfaces cleaned and decontaminated
  • Paint Correction for Added Depth, Light Swirl Removal
  • 1 layer of CarPro gloss enhancement primer applied to all painted surfaces
  • 2 layers of C.Quartz Professional – Applied to all Painted and Metal Surfaces including Wheels (front facing)
  • 1 layer of C.Quartz DLUX – Applied to all Exterior Plastic Surfaces
  • 1 layer of Silica sealant to all surfaces

$1899

GET A QUOTE

Large

  • Process needs 2 – 3 days to get the following steps done:
  • All exterior and interior surfaces cleaned and decontaminated
  • Paint Correction for Added Depth, Light Swirl Removal
  • 1 layer of CarPro gloss enhancement primer applied to all painted surfaces
  • 2 layers of C.Quartz Professional – Applied to all Painted and Metal Surfaces including Wheels (front facing)
  • 1 layer of C.Quartz DLUX – Applied to all Exterior Plastic Surfaces
  • 1 layer of Silica sealant to all surfaces

$2099

GET A QUOTE

If your car is an extension of yourself and you want something exceptional, choose CarPro. This is our most comprehensive correction, detailing, and protection package — delivered by certified professionals at a limited number of approved centres. The C.Quartz Professional package gives you complete care plus guidance on maintenance routines that can extend protection for up to 10 years.

ADDITIONAL OPTIONS

CQuartz leather ceramic coating

Upholstery and Carpets Protection with CQuartz Fabric

* Official warranty and eligible for ICBC claims for reapplication if car accidents occur.

** Vehicles must be clean prior to service. Car wash is an additional $50.

*** Prices listed are estimates. Please book a free assessment for an accurate estimate.

ADDITIONAL INFORMATION

IS CERAMIC COATING WORTH IT?
WHAT ARE THE BENEFITS OF CERAMIC COATING FOR CARS?
BREAKING DOWN THE COST OF CERAMIC COATING 2022

FAQ

Book Your Ceramic Coating Today – Protect Your Investment for the Next Years.

How much does Smart ceramic coating cost in Vancouver?

$600–$2,200 installed is Gleamworks’ published range for a compact or sedan. The final price depends on coating term, paint condition, and whether the contrast panels or tridion safety cell need correction first. A one-year coating runs $600–$1,200, while longer-term options cost more because prep and product choice matter.

Should I use a paint shop for Smart ceramic coating?

Usually no, unless the installer can explain the prep, product, and aftercare in writing. Generic installers may offer a lower entry price, but the gap should buy real paint correction and a coating suited to the car’s condition. Gleamworks uses CQuartz Professional, Gtechniq Crystal Serum Ultra, Revivify, and graphene options, with correction done in-house.

What are the downsides of ceramic coating a Smart?

The main downside is cost, and ceramic coating is not scratch-proof. It adds a thin, hard sacrificial layer that resists light marring, but it will not stop stone chips, deep scratches, or parking damage. Proper prep also takes time. A cheap install over swirls, oxidation, or poor washing marks can leave the car looking worse than an uncoated one.

How long does ceramic coating last on a Smart?

Most Smart coatings last 9–18 months, 3–5 years, 5–7 years, or up to 9 years with maintenance, depending on the package. Life drops with frequent abrasive washes, neglected bird droppings, tree sap, and constant outdoor parking. The coating still needs regular washing, but it makes grime and water spotting easier to manage.

What ruins a Smart ceramic coating?

Automatic brush washes, dirty wash mitts, harsh degreasers, and wiping dry dust across the paint wear a coating down fast. Do not let bird droppings, sap, brine, or mineral-heavy water sit for days. Avoid polishing the coated surfaces unless correction is needed, since polishing removes part of the sacrificial layer along with defects.

Can I take a ceramic-coated Smart through a car wash?

Yes, a touchless wash is generally safer than a brush tunnel. Hand washing with a clean mitt, proper shampoo, and separate wheel tools is best. Keep a pressure-washer nozzle moving and do not hold it close to trim edges or damaged paint. A coating helps release dirt, but it cannot make dirty brushes safe.

Is ceramic coating worth it on a Smart in Vancouver?

Yes, especially for a car parked outside. Vancouver gets 1,159.5 mm of annual precipitation across 169.5 days with measurable precipitation. Rain that dries can leave mineral spots, while Cypress Mountain trips add sand and salt. Coating will not prevent chips, but it makes routine cleaning easier and reduces light wash marring.

Does ceramic coating help preserve a discontinued Smart?

Yes, preserving original paint matters more after Smart’s 2019 North American withdrawal. Replacement panels can be harder to source, and clean original finish supports collector appeal. Coating helps limit staining and light marring, while prompt chip repair matters for corrosion. Repainting one panel in Metro Vancouver is typically in the range of $600–$1,500.

REQUEST AN APPOINTMENT ONLINE

After you submit the form, a representative will call you back with the information you’ll need to make an appointment.





    Please prove you are human by selecting the cup.

    ▲
    Cart
    Call Now