Gleamworks Car Detailing & Ceramic Coating Vancouver

STEK DYNOshield PPF Installation in Vancouver, BC

Gleamworks is a certified STEK installer in Greater Vancouver. DYNOshield is the film of choice for exotic vehicle owners and anyone for whom the optical difference between good and exceptional is not a matter of preference — it’s the standard.

What Is STEK DYNOshield PPF?

STEK (Shield Technologies) built its reputation by targeting a specific segment of the market: boutique studios and exotic vehicle owners who will not accept the orange-peel texture that characterises most paint protection films under direct light.

DYNOshield is STEK’s flagship — an 8.0 mil TPU film with a nano-ceramic topcoat bonded at the molecular level during manufacturing. That’s not a surface treatment that wears off. The ceramic is fused into the film itself. The result: hydrophobic performance that rivals standalone ceramic coatings from the moment installation is complete, without a separate ceramic coating appointment.

For Vancouver drivers, DYNOshield’s self-healing mechanism offers a practical advantage. It activates at lower temperatures than XPEL or 3M — warm water or ambient sunlight is sufficient to recover minor surface abrasions. During Vancouver’s October-to-April rain season, when direct sun is limited, this low-heat activation means your film is recovering in conditions where higher-threshold films are waiting for heat that may not arrive that day.

STEK PPF Product Lines

DYNOshield is the standard choice for luxury and performance vehicles. DYNOmight at 10.0 mil adds physical film mass for high-impact environments — track vehicles, Sea-to-Sky corridor regulars, or vehicles that regularly drive on gravel. DYNOmatt converts a gloss finish to satin without paint modification. DYNOprism is a niche colour-change option for owners who want a visual transformation alongside protection.

DYNOshield
Thickness: 8.0 mil
Finish: High Gloss (Nano-Ceramic)
Self-Healing: Low Heat / Warm Water
Warranty: 10 Years
DYNOmatt
Thickness: 8.0 mil
Finish: Matte
Self-Healing: Low Heat / Warm Water
Warranty: 10 Years
DYNOmight
Thickness: 10.0 mil
Finish: High Gloss (Thick)
Self-Healing: Low Heat / Warm Water
Warranty: 10 Years
DYNOprism / Fashion
Thickness: 8.0 mil
Finish: Colour Change / Pearl
Self-Healing: Low Heat / Warm Water
Warranty: 5–10 Years

What’s Included in Our STEK PPF Packages

Every package includes full surface decontamination, clay bar prep, and a pre-installation paint inspection. STEK’s adhesive requires meticulous surface preparation — this step is not optional for long-term performance.

PRICING

Paint- Protection Film Standard Package

PARTIAL FRONT COVERAGE

  • Front bumper (full face)
  • Hood leading edge (24" impact zone)
  • Side mirrors
  • A-pillar protection

From $850 + tax

GET A QUOTE
Paint Protection Film Ultimate Package

FULL FRONT COVERAGE

  • Full hood wrap
  • Full front bumper
  • Full fenders
  • Side mirrors
  • Headlights (clear only — warranty exclusion noted)
  • A-pillars

From $1300 + tax

GET A QUOTE
Paint Protection Film Platinum Package

FULL VEHICLE

  • Every painted exterior panel
  • Front and rear bumpers (complete)
  • Rocker panels, pillars, mirrors
  • Paint correction prep prior to install (where required)
  • Post-install cure guidance and written aftercare instructions

From $4000 + tax

GET A QUOTE

All pricing is before GST (5%) and PST (7%). BC PPF installation is subject to both taxes — 12% combined. STEK typically runs 10–15% below equivalent XPEL packages. Final pricing depends on vehicle size, coverage area, and prep requirements.

STEK PPF Warranty — What You Need to Know

STEK DYNOshield, DYNOmatt, and DYNOmight are all covered by a 10-year limited warranty against delamination, yellowing, bubbling, and cracking. Pair with STEK Final Coat ceramic coating and the warranty extends to 12 years.

Read More
Duration 10 years from installation date (12 years with STEK Final Coat)
Coverage Yellowing, cracking, bubbling, delamination
Transferable? No — strictly non-transferable. Original purchaser only.
Canadian Coverage Full — honoured through the original installing dealer
What Voids It Non-certified installer, headlight/windscreen application, abrasive chemicals, aftermarket paint
Warranty Remedy Film removal and replacement by the original certified installer
 
Critical: STEK's warranty is non-transferable. If you sell your vehicle, the new owner inherits zero warranty coverage regardless of years remaining. For buyers who need transferable PPF warranty coverage as a resale asset, 3M and XPEL are the correct alternatives.

Why Choose Gleamworks for STEK PPF in Vancouver

Certified STEK Installation
STEK targets boutique studios specifically because the installation requirements are higher than most volume shops are set up to meet. STEK's adhesive has slightly less immediate tack than 3M or XPEL — it requires precise surface prep and careful edge technique to achieve what the film is capable of. Gleamworks is certified for exactly this standard.
One or Two Vehicles at a Time
We don't run production-line throughput. Every DYNOshield installation gets the prep time and precision the film demands. The difference shows on black and dark metallic paint under direct light — where zero orange peel looks exactly as described, and where a rushed installation shows every artifact.
Paint Assessment Before Every Install
DYNOshield's optical clarity is its defining feature. Installing it over swirl marks or contamination defeats the purpose. We inspect every vehicle under controlled lighting before installation, and paint correction is available where needed.
Full Edge Wrapping
Every edge is wrapped and bonded — no exposed termination points. This is where PPF installations fail long-term, and it's where we don't cut corners.

FAQ

Book Your Ceramic Coating Today – Protect Your Investment for the Next Years.

Does STEK DYNOshield need an additional ceramic coating?

No. The nano-ceramic topcoat is fused into DYNOshield at the manufacturing level — it's not a surface application. Your film has ceramic hydrophobic properties from the moment installation is complete. Pairing with STEK Final Coat is optional and extends the warranty to 12 years, but the base film is already ceramic-infused. Is

STEK DYNOshield optically better than XPEL Ultimate Plus?

DYNOshield is the current market benchmark for optical clarity. Professional installers consistently describe it as the deepest, wettest gloss available — like looking at paint through glass rather than through a film. XPEL Ultimate Plus is excellent and most buyers won't notice a difference on light colours. On black or deep metallic paint under direct light, the DYNOshield advantage is visible to a trained eye.

What happens to my STEK warranty if I sell the car?

The warranty does not transfer. STEK's coverage is made exclusively to the original purchaser and terminates at point of sale. If transferable warranty coverage matters to your resale plan, 3M and XPEL are the appropriate choices.

How fast does STEK DYNOshield self-healing work?

Faster than most competing films in Vancouver's climate. Minor surface abrasions recover with warm water or ambient sunlight — typically within minutes of temperature exposure. The low-activation threshold is STEK's most practical real-world advantage in the Pacific Northwest's cooler months, when higher-threshold films are waiting for heat.

Is STEK worth it for a vehicle I plan to sell in 3–4 years?

Probably not, specifically because of the warranty. If you're selling within 4 years, the non-transferable warranty means you can't pass any remaining coverage to the buyer. XPEL or 3M give you a transferable 10-year warranty that becomes a documented resale asset. For a long-term keeper, STEK's optical quality makes it the superior product. The right choice depends on your ownership horizon.
▲
Cart
Call Now